Home > Products > RF/Microwave > MicroAmp Prototyping Boards

MicroAmp Prototyping Boards


MicroAmp Prototyping Boards

MicroAmp prototyping board for SOT-89 amplifiers.


MicroAmp prototyping board for SOT-89 amplifiers

Part#MB-1 is designed for rapid prototyping of many different RF MMIC amplifiers in the SOT-89 and other similar 4-pin packages from Avago, Hittite, Mini-Circuits, RFMD, Triquint, and others.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits SOT-89 amplifier packages
  • Supports Input/Output blocking capacitors
  • Supports bypass and bias capacitors
  • Supports dual bias resistors and RF bias inductor
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet


Size: Board dimensions = 0.490" x 0.590".

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for SOT-86 amplifiers.


MicroAmp prototyping board for SOT-86 amplifiers

Part#MB-2 is designed for rapid prototyping of many different RF MMIC amplifiers in the SOT-86 and other similar 4-pin packages from Avago, Mini-Circuits, RFMD, Triquint, and others.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane. Board dimensions = 0.490" x 0.590".

Key features and benefits include:

  • Fits SOT-86 and similar 4-pin amplifier packages
  • Supports Input/Output blocking capacitors
  • Supports bypass and bias capacitors
  • Supports dual bias resistors and RF bias inductor
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet





Size: Board dimensions = 0.490" x 0.590".

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for SOT-143 amplifiers Designed for prototyping RF/Microwave circuits. Compatible with MicroAmp Enclosure Systems


MicroAmp prototyping board for SOT-143 amplifiers

Part#MB-3 is designed for rapid prototyping of many different RF MMIC amplifiers in the SOT-143 and other similar 4-pin packages from Avago, Mini-Circuits, and others.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits SOT-143 amplifier packages
  • Supports Input/Output blocking capacitors
  • Supports RF bypass and bias capacitors
  • Supports dual bias resistors and RF bias inductor
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com


Size: 0.490" x 0.590"

$12.75


MicroAmp Prototyping Boards

Part# MB-4: Supports SOT-343 (SC-70) amplifiers Designed for prototyping RF/Microwave circuits. Compatible with MicroAmp Enclosure Systems


MicroAmp prototyping board for SOT-343 (SC-70) amplifiers

Part#MB-4 is designed for rapid prototyping of many different RF MMIC amplifiers in the SOT-343 (SC-70) and similar 4-pin packages that use a common RF output and bias pin from manufacturers such as Avago,and others.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits SOT-343 (SC-70) amplifier packages
  • Supports Input/Output blocking capacitors
  • Supports RF bypass and bias capacitors
  • Supports dual bias resistors and RF bias inductor
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:

Contact sales@twinind.com


Size: 0.490" x 0.590"

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for SOT-363 amplifiers Designed for prototyping RF/Microwave circuits. Compatible with MicroAmp Enclosure Systems


MicroAmp prototyping board for SOT-363 amplifiers

Part#MB-5 is designed for rapid prototyping of many different RF MMIC amplifiers in the SOT-363 and similar 6-pin packages that use separate RF output and bias pins from manufacturers such as Avago,CEL, and others.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits SOT-363 amplifier packages
  • Supports Input/Output blocking capacitors
  • Supports RF bypass and bias capacitors
  • Supports dual bias resistors and RF bias inductor
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet

 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:

Contact sales@twinind.com

 

Size: 0.490" x 0.590

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for single-bias SOT-363 amplifiers Designed for prototyping RF/Microwave circuits. Compatible with MicroAmp Enclosure Systems


MicroAmp prototyping board for single-bias SOT-363 amplifiers

Part#MB-6 is designed for rapid prototyping of many different RF MMIC amplifiers in the SOT-363 and similar 6-pin packages that use a common RF output and bias pins from manufacturers such as Avago,RFMD, Triquint, and others.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits SOT-363 amplifier packages
  • Supports Input/Output blocking capacitors
  • Supports RF bypass and bias capacitors
  • Supports dual bias resistors and RF bias inductor
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com


Size: 0.490" x 0.590

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for single-bias SOT-363 amplifiers Designed for prototyping RF/Microwave circuits. Compatible with MicroAmp Enclosure Systems


MicroAmp prototyping board for single-bias SOT-363 amplifiers

Part#MB-6 is designed for rapid prototyping of many different RF MMIC amplifiers in the SOT-363 and similar 6-pin packages that use a common RF output and bias pins from manufacturers such as Avago,RFMD, Triquint, and others.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits SOT-363 amplifier packages
  • Supports Input/Output blocking capacitors
  • Supports RF bypass and bias capacitors
  • Supports dual bias resistors and RF bias inductor
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com


Size: 0.490" x 0.590

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for passive networks Designed for prototyping RF/Microwave circuits. Compatible with MicroAmp Enclosure Systems


MicroAmp prototyping board for Mini-Circuits LTCC filters

Part#MB-8 is designed for rapid prototyping of microwave filters using the Mini-Circuits line of LFCN, HFCN, and BFCN components in the FV1206 package. Filters under 100MHz to over 6GHz can be quickly fabricated in lowpass, highpass, and bandpass confiturations. In addition, part# MB-8 can be used to insert a series element with a standard 1206 surface mount packages such as a DC blocking capacitor or series resistor.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits Mini-Circuits LFCN, HFCN, and BFCN filters in FV1206 packages
  • Lowpass, highpass, bandpass filters
  • Many filter options
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com

 

Size: 0.490" x 0.590

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for SOIC-8 operational amplifiers Designed for prototyping RF/Microwave circuits. Compatible with MicroAmp Enclosure Systems


MicroAmp prototyping board for SOIC-8 operational amplifiers

Part#MB-9 is designed for rapid prototyping of operational amplifier circuits using standard pinout SOIC-8 packages. It can be confirgured as an inverting or non-inverting topology with selectable input and feedback resistors and has a parallel feedback capacitor for filtering or compensation.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits standard SOIC-8 op-amp packages
  • Inverting or non-inverting configurations
  • Optional DC blocks on input and output
  • Uses standard 0603 passives
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com

 

Size: 0.490" x 0.590

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for SOT-23 operational amplifiers Designed for prototyping RF/Microwave circuits. Compatible with MicroAmp Enclosure Systems


MicroAmp prototyping board for 5-pin SOT-23 operational amplifiers

Part#MB-10 is designed for rapid prototyping of operational amplifier circuits using popular 5-pin SOT-23 packages with the output on pin 1, non-inverting input on pin 3, and the inverting input on pin 4. It can be configured as an inverting or non-inverting topology with selectable input and feedback resistors and has a parallel feedback capacitor for filtering or compensation.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits standard SOT-23 op-amp packages
  • Inverting or non-inverting configurations
  • Optional DC blocks on input and output
  • Uses standard 0603 passives
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com


Size: 0.490" x 0.590"

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for 5-pin SOT-23 operational amplifiers Designed for prototyping RF/Microwave circuits. Compatible with MicroAmp Enclosure Systems


MicroAmp prototyping board for 5-pin SOT-23 operational amplifiers 

Part#MB-10 is designed for rapid prototyping of operational amplifier circuits using popular 5-pin SOT-23 packages with the output on pin 1, non-inverting input on pin 3, and the inverting input on pin 4. It can be configured as an inverting or non-inverting topology with selectable input and feedback resistors and has a parallel feedback capacitor for filtering or compensation.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits standard SOIC-8 op-amp packages
  • Inverting or non-inverting configurations
  • Optional DC blocks on input and output
  • Uses standard 0603 passives
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com


Size: 0.490" x 0.590"

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for Analog Devices Log Detectors Designed for prototyping RF/Microwave circuits. Compatible with MicroAmp Enclosure Systems


MicroAmp prototyping board for Analog Devices Log Detectors

Part#MB-12 is designed for rapid prototyping of RF log detector circuits using Analog Devices AD8317/8319 devices in LFCSP packages. It can be configured in measurement or controller modes by selectively installing the appropriate resistors. Using these detectors, the MB-12 can provide a wide dynamic range log detection function at fequencies up to 10 GHz.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits Analog Devices AD8317/8319 LFCSP packages
  • 10 GHz fequency range
  • Controller or measurement mode
  • Uses standard SMD passive components
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com


Size: 0.490" x 0.590"

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for Hittite VCOs in LP4E packages Designed for prototyping RF/Microwave circuits. Compatible with MicroAmp Enclosure Systems


MicroAmp prototyping board for Hittite VCOs in LP4E packages

Part#MB-13 is designed for rapid prototyping of microwave VCOs using Hittite Microwave devices in LP4E packages with RF outputs on pin 16, tuning controls on pin 22, and bias on pin 20.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits Hittite VCOs with LP4E packages
  • Usable with HMC384-386, 388-391, 416, 429-431, 466, 505, 506, 532 VCOs
  • VCOs fequencies from 2-8 GHz
  • Uses standard SMD passive components
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com


Size: 0.490" x 0.590"

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board - straight through transmission line


MicroAmp prototyping board - straight through transmission line

Part#MB-14 is used for a straight through connection with the MH-series of connectorized housings. It can be used as an extension when designing multiple board circuits with the MH-2 enclosure, thereby allowing a single board to be tested before adding a second one in cascade. The MB-14 can also be used to create custom passive networks by cutting the center trace and soldering components in series or shunt.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Used for straight-through connections
  • Can be used for custom passive networks
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet  

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com


Size: 0.490" x 0.590"

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for Hittite Multipliers in LP4E packages


MicroAmp prototyping board for Hittite Multipliers in LP4E packages

Part#MB-15 is designed for rapid prototyping of active frequency multipliers using Hittite Microwave devices in LP4E packages with RF inputs on pin 3, RF outputs on pin 16, and bias on pins 19-23. Multiplier MMICs are available in various multiplicatoin factors with output frequencies throughout the X and Ku-band range.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits Hittite frequency multipliers with LP4E packages
  • Usable with HMC370, 443-445, 575, 695 multipliers
  • Output fequencies in X and Ku band
  • Uses standard SMD passive components
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com


Size: 0.490" x 0.590"

$12.75


MicroAmp Prototyping Boards

MicroAmp prototyping board for Hittite Tunable Filters in LP4E packages


MicroAmp prototyping board for Hittite Tunable Filters in LP4E packages

Part#MB-16 is designed for rapid prototyping of tunable bandpass filters using Hittite Microwave devices in LP4E packages with RF inputs on pin 3, RF outputs on pin 16, and control connections on pins 8-10. Filter MMICs are available at various frequencies throughout the 6.8 to 21 GHz range.

The boards are fabricated with high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating on both the component side and the solid bottom ground plane.

Key features and benefits include:

  • Fits Hittite tunable filters with LP4E packages
  • Usable with HMC895-898 tunable bandbass filters
  • Uses standard SMD passive components
  • RO-4350 board material
  • Fits MicroAmp MH-series enclosures

Click Here To Download Datasheet 

ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com


Size: 0.490" x 0.590"

$12.75


© Copyright Twin Industries 2023 - All rights reserved