General Purpose Prototyping Board

• Prototyping area 6.2" x 4.5" consisting of plated through holes on a 0.1" grid.
• Power of ground plane utilizes an interleaving design.
• Uncommitted I/O interface 2/22 gold plated fingers on .156 centers.

$45.00

2.8"x3.4" of plated holes on a .05" grid. 2/18 gold fingers on .156 centers. Plated hole diameter = 28mils

Special Order

General Purpose Prototyping Board

• 4.0" x 8.0" of plated holes on a 0.05" grid and 4.0" x 8.0" of plated holes on a .10" grid.
• P lated hole size is 0.035" for .1" grid area, and 0.026" for .05" grid area.
• Ground plane on rear side of board. Plated holes isolated from plane by annular ring of exposed FR4 material.
• Hi-temp laminate with gold plating

$58.00

General Purpose Prototyping Board

• Prototyping area 6.2" x 4.5" consisting of plated through holes on a 0.1" grid.
• Uncommitted I/O interface 2/36 gold plated fingers on .100 centers.
• Space provided for 54 IC's with up to 16 pins per socket.

Obsolete - see 4010-4565 for alternate part

Prototyping Board with 2mm spacing

• Plated through holes on 2mm x 2mm grid.
• Board size mimics 3U board size (160mm x 100mm)
• Interior plated hole size is 32mils (0.032"), which will accept 2mm x 2mm square post headers.

$22.50

Prototyping Board with offset rows

• Plated through holes on 0.1" x 0.1" grid.
• Additional rows of 0.1" x 0.1" plate holes offset by 0.05".

$59.00