Continuity Tester Kit - DIY

A Continuity Tester is one of the most useful pieces of test equipment to have. It is used for testing the electrical path (continuity) between two points. It is more useful and efficient than using a multimeter to do the same job. 

PARTS LIST - KIT 110

Resistors (0.25W carbon, 5%)

• 1K2 brown red ..................R8..................... 1
• 1K5 brown green ...............R1..................... 1
• 2K7 red violet ...................R4..................... 1
• 39K orange white orange........R9,10.............. 2
• 47K yellow violet range........R5.................... 1
• 100K brown black yellow.......R6,7.................. 2
• 270K red violet yellow ...........R3................... 1
• 2M2 red red green ..................R2.................. 1

Capacitors

• 1.8nF polyester ...................C2 ..................... 1
• 4.7nF polyester ...................C3 ..................... 1
• 47nF polyester ....................C1 ..................... 1
• 10uF 16/25V electrolytic ....C4,5 ..................... 2

Semiconductors

• LM324, Quad Op-Amp.........IC1....................... 1
• 1N4148 diode .....................D1....................... 1
• Miscellaneous
• Slide switch.......................SW1,2................. 2
• Piezo external drive buzzer........................... 1
• 9V battery harness ............................... 1

PCB,

• K110............................................ 1

$9.99