VME64 and VME64x Backplanes
VME64/x Backplanes
VME64x 6U backplanes
Key features and benefits include:
- 6U VME64x backplanes with J1/J2 connectors
- Available with 2mm J0 connectors
- Automatic daisy chain with OR gates(electronic) or manual daisy chain via jumpers or wire-wrap connections
- Active or passive termination
- Available in 2 to 21 slot configurations
ADDITIONAL TECHNICAL INFORMATION OR TO PLACE AN ORDER:
Contact sales@twinind.com
email sales@twinind.com for pricing/availability
VME 5 slot J1/J2 monolithic backplane
FEATURES:
- Meets or exceeds VME / IEEE Specifications Controlled Impedance "Stripline Design".
- Layer Construction with Ground Only Outer Layers Removable In-Board / On-Board Terminators.
- Both High and Low Frequency Decoupling Capacitors Front and Rear.
- Accessible Bus Grant Jumper Pins Electro-Mechanically End-Stackable.
Electrical Characteristics:
PCB:
|
8 Layers, .125" Thick, 55-60 Effective Impedance
|
Connectors:
|
Din 41612 Class II, 400 Mating Cycles, Rated 2 Amps Per Contact
|
Power Taps:
|
10-Pin, Screw Terminal, Rated 25 Amps
|
Termination:
|
Removable 10-Pin Sips, 330 (/470( Dual Terminating Networks
|
Size: 10.374"x3.8"
$79.00
VME 7 slot J1/J2 monolithic backplane
VME 7 slot J1/J2 monolithic backplane
FEATURES:
- Meets or exceeds VME / IEEE Specifications Controlled Impedance "Stripline Design".
- Layer Construction with Ground Only Outer Layers Removable In-Board / On-Board Terminators.
- Both High and Low Frequency Decoupling Capacitors Front and Rear.
- Accessible Bus Grant Jumper Pins Electro-Mechanically End-Stackable.
Electrical Characteristics:
PCB:
|
8 Layers, .125" Thick, 55-60 Effective Impedance
|
Connectors:
|
Din 41612 Class II, 400 Mating Cycles, Rated 2 Amps Per Contact
|
Power Taps:
|
10-Pin, Screw Terminal, Rated 25 Amps
|
Termination:
|
Removable 10-Pin Sips, 330 (/470( Dual Terminating Networks
|
Size: 10.374"x5.4"
$99.00
VME 12 slot J1/J2 monolithic backplane
VME 12 slot J1/J2 monolithic backplane
FEATURES:
- Meets or exceeds VME / IEEE Specifications Controlled Impedance "Stripline Design".
- Layer Construction with Ground Only Outer Layers Removable In-Board / On-Board Terminators.
- Both High and Low Frequency Decoupling Capacitors Front and Rear.
- Accessible Bus Grant Jumper Pins Electro-Mechanically End-Stackable.
Electrical Characteristics:
PCB:
|
8 Layers, .125" Thick, 55-60 Effective Impedance
|
Connectors:
|
Din 41612 Class II, 400 Mating Cycles, Rated 2 Amps Per Contact
|
Power Taps:
|
10-Pin, Screw Terminal, Rated 25 Amps
|
Termination:
|
Removable 10-Pin Sips, 330 (/470( Dual Terminating Networks
|
Size: 10.374"x9.4"
$109.00
VME 21 slot J1/J2 monolithic backplane
VME 21 slot J1/J2 monolithic backplane
FEATURES:
- Meets or exceeds VME / IEEE Specifications Controlled Impedance "Stripline Design".
- Layer Construction with Ground Only Outer Layers Removable In-Board / On-Board Terminators.
- Both High and Low Frequency Decoupling Capacitors Front and Rear.
- Accessible Bus Grant Jumper Pins Electro-Mechanically End-Stackable.
Electrical Characteristics:
PCB:
|
8 Layers, .125" Thick, 55-60 Effective Impedance
|
Connectors:
|
Din 41612 Class II, 400 Mating Cycles, Rated 2 Amps Per Contact
|
Power Taps:
|
10-Pin, Screw Terminal, Rated 25 Amps
|
Termination:
|
Removable 10-Pin Sips, 330 (/470( Dual Terminating Networks
|
Size: 10.374"x16.6"